Type-4
An order straight to the machine
The Draco Connect System allows for orders to be sent directly from the ERP system or a pre-defined file to the machine with WiFi or USB. There is no need to remember the number of cuts, the required length or to change the material - the system will collect the order and coordinate its implementation.
Automatic adjusting fabric size
After the upper fabric edge has been levelled the Rollcutter will automatically grab the fabric and will set it to the desired size. After each cutting cycle the cut-off material is laid at the given location. The gripping rail may also be used as a rule moving in a given range.
Of course it is also possible to automatically download the complete order to Rollcutter using the Draco Connect System.
Smart cut
The whole cutting process you perform without moving from one place, adjusting the knife speed to the type and quality of fabric by intuitive interface.
SmartStart Function makes that the knife will not pull even the delicate fabric during starting and stop the movement, if unwanted object appears between pressure and table top.
Knife change-out in just one second
Rollcutter Type-3 can be equipped with two or three knifes in an auto-change mode. All you need to do is to press one button in order to adjust the knife to the match the fabric type, which makes it work faster and your production is more flexible.
Work safety
Rollcutter Type-3 has been equipped in optical clamp barriers, which ensure the work is performed in a safe way and you can focus on your work. If an undesirable object is caught between the table and the pneumatic clamp the Rollcutter will automatically stop the Production process. In addition you can also use both hand and foot operated safety switches at your disposal.
Check Type-4 in action
Additional benefits
Always straight blinds
The Rollcuter has an aluminium construction that allows for precise adjustment of the right angle (diagonal adjustment), clamp adjustment and table levelling, making roller blinds always straight and equal.
Always safe to work with
Each Rollcuter model is built with usage safety in mind. The machines are equipped in sensors that detect objects under the open clamp, emergency safety switches as well as anti-collision systems for the clamp.
Free training
The Rollcutter stands not only for a roller blind producing machine, but also for a comprehensive knowledge on the complete production process. We will train both you and your employees free of charge in order to use the production potential in an optimal way and minimize the time needed to implement changes.
Immediate support
Should you require assistance we will support you as soon as you contact our consultant.
Clever corners
During mounting the top tube to the fabric, you can easily adjust the bumper in the corner to the needed system. You can also install rolling machine, which rolls up the blind 8 times faster comparing to manual.
Secondly, Clever Corner is used to quickly stick the rigid tape to the fabric, where you slide the bottom bar. Installation of Tape Feeder will definitely help you with sticking correctly tape and accelerate the process in the same time.
Full quality control
You control quality of production from the beginning to the end. After unwinding the textile, the backlight allows you to check the quality of fabric and eliminate mistakes. Whereas, Control Lift allows you to check the correctness of rolling when the blind is ready.
Photo gallery
Recommended additional equipment
Technical data
|
Power supply voltage |
Control voltage |
Power supply |
Pneumatic system pressure |
Weight of the 300x400cm |
Construction |
|---|---|---|---|---|---|
|
1~230 V/50 Hz+PE |
24 V /DC |
2000 W |
4 bar |
500 kg |
Riveted and screwed, aluminium, PRO |
|
Cutting cycle |
Automatic with fabric placement on given size |
|
Knife movement |
Automatic |
|
Guide |
4-row ball guide without clearance, lubrication after 1000 km |
|
Knife blade |
Electric circular |
|
Fabric clamp |
Pneumatic |
|
Cutting width |
up to 4000 mm (price depending on size) |
|
Delivery board length |
up to 4000 mm (price depending on size) |
|
Safety switch |
Foot and hand switches |
|
Optical safety barriers |
The clamp will not set off if the barrier is on |
|
Start block |
The knife will not set off when the fabric clamp is raised |
|
Fabric sensor |
Blade turns around automatically after cutting the fabric |
|
Backlight |
Width 16 cm, wider sizes can be ordered |
|
Fabric clamp |
two-side |
|
Pneumatic actuators |
On left and right side |
|
Control panel |
Touch panel 7” (DR-HMI) |