Rollcutter Type-2

Ideal for a developing production.

It improves productivity with automatic knife feed, furthermore it can optionally be expanded with its production capacity increased.

Type-2

FAST DIMENSION

First, you unwind the fabric on the receiving rollers and then precisely set the dimension using Measuring angle bar with digital screen or measures recessed in the table top. Our machine can be equipped in autocentering, which sets the fabrics exactly at right angle to the edge.

SMART CUT

The whole cutting process you perform without moving from one place, adjusting the knife speed to the type and quality of fabric by intuitive interface.

SmartStart Function makes that the knife will not pull even the delicate fabric during starting and stop the movement, if unwanted object appears between pressure and table top.

CLEVER CORNERS

During mounting the top tube to the fabric, you can easily adjust the bumper in the corner to the needed system. You can also install rolling machine, which rolls up the blind 8 times faster comparing to manual. Secondly, Clever Corner is used to quickly stick the rigid tape to the fabric, where you slide the bottom bar. Installation of Tape Feeder will definitely help you with sticking correctly tape and accelerate the process in the same time.

FULL QUALITY CONTROL

You control quality of production from the beginning to the end. After unwinding the textile, the backlight allows you to check the quality of fabric and eliminate mistakes. Whereas, Control Lift allows you to check the correctness of rolling when the blind is ready.

Check Type-2 in action

Additional benefits

Always straight blinds

The Rollcuter has an aluminium construction that allows for precise adjustment of the right angle (diagonal adjustment), clamp adjustment and table levelling, making roller blinds always straight and equal.

Always safe to work with

Each Rollcuter model is built with usage safety in mind. The machines are equipped in sensors that detect objects under the open clamp, emergency safety switches as well as anti-collision systems for the clamp.

Free training

The Rollcutter stands not only for a roller blind producing machine, but also for a comprehensive knowledge on the complete production process. We will train both you and your employees free of charge in order to use the production potential in an optimal way and minimize the time needed to implement changes.

Immediate support

Should you require assistance we will support you as soon as you contact our consultant.

Technical data

Power supply voltage

Control voltage

Power supply

Pneumatic system pressure

Weight of the 300x300cm

Construction

1~230 V/50 Hz+PE 24 V /DC 600 W 4 bar 280 kg

Riveted and screwed, aluminium, EKO

Cutting cycle

Automatic after setting the size

Knife movement

Automatic

Guide

Sliding guide with clearance regulation

Knife blade

Electric circular

Fabric clamp

Automatic-gravitational

Cutting width

up to 3500 mm (price depending on size)

Delivery board length

up to 3500 mm (price depending on size)

Safety switch

Manual

Start block

Knife will not set off with fabric clamp raised

Knife return

Knife turn around automatically after reaching the table end or it can be done by pressing the “return” button

Backlight

Width 16 cm, greater sizes may be ordered

Fabric clamp

One-side

Pneumatic actuators

two (on the left and right side)

Control panel

Control buttons

Contact us for more information