Cutbooster - boost your cutting

increase the efficiency of your cutting and free up additional production capacity

Stand for cutting

Cutbooster A-1

The A-1 is the basis for effective cutting. All you need to do is enter the dimension and the fender instantaneously moves to the preset distance with an amazing accuracy. It fits every type of saw (aluminum, steel, PVC)

See more

Cutbooster A-2

Cutbooster A2 is the first step in the process of automation of production. The A-2 automatically feeds and cuts the material in the preset number of cuts.

Cutbooster A-3

Cutbooster A-3 is a fully automatic section cutting line. The A-3 collects, cuts, and puts away materials automatically. Depending on the options, the machine can work on individual sections or on entire packets.

Cutbooster Manual

If you do not need an automatic gauge, your cutting station can be equipped with a manual gauge, which is just as precise.

Increase the cutting efficiency thanks to

Cut three times faster and with even greater accuracy

Using a Cutbooster with an automatic positioning device, you can quickly set the length of the element being cut. All you need to do is enter the dimension using the touch screen; the fender immediately adjusts to the set distance with the accuracy of 0.25 mm

The Cutbooster performs self-calibration and maintains the dimensions by using a servomotor.

Never make any errors

Thanks to the Draco Connect system, you can send a cutting list directly to your ERP system or upload it using a USB flash drive. You do not need to remember the number of cuts, the required length and the change of material: the system receives the order and coordinates its implementation, which significantly speeds up the work and excludes the possibility of any production errors.

Cut without losses

Thanks to the CutLogic software, you can start making maximum use of your materials by optimizing the cutting order so as to minimize the quantity of waste (even down to 0.5%!). The system makes calculations for your order and then sends them to the machine. As a result, you can save both time and material.

Guaranteed quality and reliability

Our machines are currently in use in over 300 companies in over 40 countries. Thanks to our knowledge and experience, as well as opinions of our customers all over the world, you can cut much faster and more accurately. The dimensions of cut elements are always be good and the quantity of waste are minimized.

Select the optimum model

Cutbooster Manual

Cutbooster A-1

Cutbooster A-2

Cutbooster A-3

Cutbooster Manual is a cutting station equipped with a manual gauge. Cutbooster A-1 is a cutting station equipped with an automatic gauge. All you need to do is enter the dimension and the fender instantaneously moves to the preset distance Cutbooster A2 is the first step in the process of automation of production. The A-2 automatically feeds and cuts the material in the preset number of cuts. Cutbooster A-3 is a fully automatic cutting line. The A-3 collects, cuts, and puts away materials automatically.
More More More More
See a comparison of the models