Cutbooster PA-3

A fully automatic aluminum, steel, and PVC cutting line

Cutbooster PA-3

Fully automatic cutting

Cutbooster PA-3 is a fully automatic section cutting line that does the work for you. The PA-2 has a magazine that feeds the material to be cut, an automatic saw that cuts sections into a preset number of pieces, and a receiving station where the cut pieces are stored.

Feeding and receiving magazine

Before cutting, profiles or all packets are kept in the feeding magazine. The magazine can contain up to 15 packets, which are sequentially fed to be cut in accordance with the schedule. The cut pieces are kept in the receiving magazine.

Full control in the panel and reduction of waste to a minimum

The entire cutting process can be controlled using the touch panel. You have access to the cutting list, the order import system, and the waste reduction system. Thanks to the CutLogic software, you can make the maximum use of the materials and reduce waste to as little as 0.5%!

Data transfer

The Draco Connect system makes it possible to send orders from the ERP system or from a prepared file directly to the machine via a Wi-Fi network or a USB port. You do not need to remember the number of cuts, the required length and the change of material: the system receives the order and coordinates its implementation.

Check Cutbooster PA-3 in action

Improved work organisation

Code reader

Label printer

The work on the cutting stand can be enhanced even further by using a code reader and a label printer. A code reader allows you to instantly scan a given dimension from a list, while with a label printer each element that has been cut can be instantly labeled and described.

Why Cutbooster PA-3?

  • Automatic sliding of the material to be cut into a pre-set number of pieces
  • Automatic loading of material from the store and storage of cut elements
  • An automatic saw with pneumatic clamp
  • A table with a top (standard) or with rollers (option)
  • Machine dimension as required by the customer
  • A correction system
  • Label printer and bar code reader (option)
  • Connection to ERP systems (option)
  • A servomotor - positioning accuracy +/- 0.25 mm per 3 m
  • A playless ball guide (HIWIN)
  • CutLogic - cutting optimization

Customers about Draco

We highly recommend Draco as an reliable and trusted company for everyone who needs roller blinds machine. Lasse Pohjonen Almedahls OY, Finland

With Rollcutter we have worked for 5 years, we have made few tens of thousands cuts, machine works without any problems. Innovative solutions supporting each phase of production guarantee significant increase in performance. Sławomir Witkowski

Technical data

Taking of material
Automatic, from the feeding magazine
Setting the dimensions
Feeding of cut elements
Collection of material
Automatic, to the collecting magazine
Cutting device
An automatic saw, 400 mm, with a pneumatic clamp
Cutting of materials
Entering the dimensions
Manual using a touch panel
4-row, ball, playless, lubricated after a distance of 1,000 km
Fender stroke
600 cm
Feeding table
A 600x60 cm table with a top
Receiving table
A 300x60 cm table with a top
Feeding magazine
Possibility to load 15 packets
Receiving magazine
Storage of elements after cutting 
Material feeding speed
0.4 m/s
+/- 0.25 mm
Corrections of dimensions
Possibility to enter constant dimension corrections for many systems
Cutting history
Saving completed cuts in a memory
A servomotor to "maintain the dimension"
Safety switches
Safety block
No possibility to operate the saw with the guard opened
Control panel
A 7" touch panel
Self-diagnostics on the touch panel
A cutting list
A list containing the following columns: dimension and quantity
Contact us for more information